Adjust Menu; Time Menu - Haier LEB32T3 Owner's Manual

Reset
Press / to select OK or Cancel which with Do
you want to reset option values.

Adjust Menu

The TV can be used as a display, and you may adjust
relevant settings. Press SOURCE to switch the signal
input to PC mode.
Press MENU to display the screen main menu, and
then press / to select the Adjust menu as
shown in the below figure.
Press / to select the option to be adjusted.
Press / to adjust it.
Image Position
This is used to adjusting H-Position and V-Position.
H-Size
Vertical and Horizontal position of picture can be
adjusted in this item.
V-Size
Vertical and Horizontal position of picture can be
adjusted in this item.
Auto Adjust
Vertical and Horizontal position of picture can be
adjusted in this item.
Clock
This is used for adjusting the phase of pixel clock in PC
mode.
Phase
This is used for adjusting H Position and V Position as
well as relative parameters in PC modes.
Reset
Return to factory default settings.

Time Menu

Press MENU button and then use
select Time menu.
Press / button to select the desired option.
Press OK to enter its submenu.
Current Time: The current time is calculated from the
moment upon turning the TV on. At first, check whether
the time indicated on the TV's clock is consistent with the
standard time of your time zone; if not, adjust the clock as
follows:
• Press MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press /
afterwards press
option
• Press / to set hour and minute.
• Press . / to adjust the time.
• After finishing time setting, press
Off Time/On Time: Set a time for the TV to turn of or
on.This function allows the TV to automatically turn on or
enter standby mode upon reaching the preset time.
• Press OK to enter the setting screen, and then
press / to select ON or OFF, if you select ON,
LED -LCD television Owner's Manual
Specification and Format
/ button to
to select the Timer menu,
/ to select the Current Time
MENU to confirm.
19