How To Customize Your Own Picture Status; Sound Menu; How To Select The Sound Mode - Haier LEB32T3 Owner's Manual

How to customize your own picture status

Press MENU button and then use
select Picture menu.
Press / button to select the desired items. Press
OK to enter its submenu.
Press / button to adjust the setting.
Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Sharpness
This will adjust the sharpness of fine details in the
picture.
Note
❏
The picture options can only be adjusted in the
User mode. The other picture modes are preset.
Tint
Allows you to select the color mix (Tint) of the picture.
Picture Mode
Select the mode of picture:
Standard, Mild, User, Dynamic and EyeGuard.
LED 3D_DIM
Select the 3D-DIM Demo or 3D-DIM Calibration, Press
OK to set.
Palette:
Press
press OK to enter its submenu, and finally press
/ button to
(Cool2, Cool1, Standard, Warm1, Warm2, User) to your
color preference. Normally, the Standard mode is
selected.
If the User mode is selected, press
the palette menu, (as shown in the below figure),
and then press
range of 2500K~15000K from warm color to cold
color, afterwards press
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
Reset
Press

Sound menu

How to select sound mode
/ to select the Palette option, and then
/ to select a toner pattern from six patterns
/ to select a benchmark in the
/
Contrast Brightness Color Sharpness
Picture
Cool2
+50
Sound
Volume Balance Digital SRS
Cool1
Programe. Auto Tun. Exchange
Channel
Standard
0
Warm1
Language Menu Time Picture MEMC
Function
out Optimize
-50
Warm2
Adjust
Image Po.. Horizont Wertical. Auto..
User
Current.. Off Time Off Time On Channel Remind T.. Remind C..
Timer
MENU
/ to select OK or Cancel.
Press MENU button and then use
select Sound menu.
Press / button to select Digital tone Mode.
Press OK to enter its submenu.
Press / button to select the option Standard,
Music, Movie and User.
LED -LCD television Owner's Manual
Specification and Format
/ to enter
to adjust; if a different
Tint Picture LED Reset
Palette
Mode 3D_DIM
AVL MAXX Bass Reset
DSM Background OPC Eye Guard Reset
Mode
Clock Phase Reset
OK
/ button to
15