Sanyo PLC-XTC50AL Specifications page 24

PLC-XTC50AL Basic Serial Command Functional Specifications
0û "21" [CR]
Status: Cooling Down in process after OFF due to Lamp Failure
When the projector is turned off due to lamp failure, it automatically starts Cooling Down operation.
The projector returns "21" [CR]. "21" [CR] has been kept during Cooling Down operation.
"81" [CR]
0û
Status: Standby after Cooling Down due to Lamp Failure
The projector has recovered from Lamp Failure status. When the projector enters Standby
status after Cooling Down operation invoked due to lamp failure, it returns "81". This indicates
the status turns to Standby due to lamp failure. This status continues until the next operation is
started; when Power On is executed, the projector clears the information of Lamp Failure and
normal operation starts.
0û "2C" [CR]
Status: Cooling Down in process due to Shutter management function
This indicates it has moved to Cooling down status according to the setting of Shutter
Management function in setting menu. During this time, Functional Execution Commands are
not accepted.
0û "8C" [CR]
Status: Standby after Cooling Down due to Shutter management function.
This value is returned when Cooling Down operation due to Shutter management has been
completed and the status has been moved to Standby. The status is kept until the next
operation starts. When projector is turned on again, it cancels the last status and starts normal
operation.
24/26