ASROCK Z68M-ITX/HT User Manual page 26

Serial ATA3 Connectors
(SATA_0 (PORT 0):
see p.12, No. 3)
(SATA_1 (PORT 1):
see p.12, No. 2)
Serial ATA (SATA)
Data Cable
(Optional)
3.5mm Audio Cable
(Optional)
USB 2.0 Headers
(9-pin USB6_7)
(see p.12 No. 11)
(9-pin USB8_9)
(see p.12 No. 9)
Consumer Infrared Module Header
(4-pin CIR1)
(see p.12 No. 10)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.12 No. 15)
These two Serial ATA3 (SATA3)
connectors support SATA data
SATA_0 (PORT 0)
cables for internal storage
devices. The current SATA3
SATA_1 (PORT 1)
interface allows up to 6.0 Gb/s
data transfer rate.
Either end of the SATA data
cable can be connected to the
SATA / SATAII / SATA3 hard
disk or the SATAII / SATA3
connector on this motherboard.
Either end of the 3.5mm audio
cable can be connected to the
portable audio devices, such
as MP3 player and mobile
phone or the Line-in port of
your PC.
Besides four default USB 2.0
ports on the I/O panel, there
are two USB 2.0 headers on
this motherboard. Each
USB 2.0 header can support
two USB 2.0 ports.
USB_PWR
P-9
P+9
GND
DUMMY
1
GND
P+8
P-8
USB_PWR
This header can be used to
1
connect the remote
GND
IRTX
IRRX
controller receiver.
ATX+5VSB
This is an interface for front
GND
PRESENCE#
MIC_RET panel audio cable that allows
OUT_RET
convenient connection and
control of audio devices.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
26