Preparing To Connect; Preparing Your Projector; Preparing Your Computer - Epson PowerLite Pro Z8250NL Operation Manual

Preparing to Connect

Preparing to Connect

Preparing Your Projector

Follow the steps below to put the projector into connection standby
status. When connecting via wired LAN, check that the projector is
connected to the network with a commercially available network cable.
When connecting via wireless LAN, install the wireless LAN unit in the
projector.
A
Turn on your projector.
B
Make the projector's network settings.
When connecting the computer to the projector via wireless LAN,
connect using the Advanced connection mode. You cannot con-
nect using the Quick connection mode.
See your projector User's Guide for details on network settings.
C
Change the projector's input source to LAN.
The LAN standby screen is displayed.

Preparing Your Computer

Follow the steps below to connect the computer to the projectors and
start projecting.
A
Install EasyMP Multi PC Projection on the computer.
s "Installing the Software"
B
Make the computer's network settings, and connect the
computer to the network.
s Computer's documentation
q
When the computer you are using is already connected to the network, you
do not need to make network settings on the computer.
C
Start EasyMP Multi PC Projection.
s "Starting EasyMP Multi PC Projection"
p.6
p.15
14