System Panel Connector; Lpt Connector - Asus P8H61-M LE User Manual

8. System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
P8H61-M LE/USB3 System panel connector
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
• System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
• ATX power button/soft-off button (2-pin PWRSW)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
9. LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT is
standardized as IEEE 1284, which is the parallel port interface on IBM PC-compatible
computers.
P8H61-M LE/USB3 LPT connector
1-26
PANEL
P8H61-M LE/USB3
P8H61-M LE/USB3
PLED SPEAKER
PIN 1
IDE_LED PWRSW RESET
* Requires an ATX power supply
LPT
ASUS P8H61-M LE Series