Table of Contents
Advertisement
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
Select the Change User Password item and press <Enter>.
2.
On the password box that appears, type a password composed of up to six letters
and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message "Password Installed" appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup utility. When
set to [Always], BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
2.7
Tools menu
The Tools menu items allow you to launch special functions. Select an item then press
<Enter> to display the submenu.
Main
Advanced
ASUS EZ Flash 2
Express Gate
Enter OS Timer
Reset User Data
AI NET 2
2.7.1
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice. See section 2.1.2 ASUS EZ Flash 2 utility for details.
2-20
Power
[Auto]
[10 Seconds]
[No]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Tools
Exit
Press ENTER to run
the utility to select
and update BIOS.
This utility supports
1.FAT 12/16/32 (r/w)
2.NTFS (read only)
3.CD-DISC (read only)
Select Screen
Select Screen
Select Item
Select Item
+-
Enter Go to Sub-screen
Change Field
F1
Enter Go to Sub Screen
General Help
F1
General Help
F10
Save and Exit
F10
Save and Exit
ESC
Exit
ESC
Exit
Chapter 2: BIOS setup
Hide quick links:
Advertisement
Table of Contents
