Table of Contents
Advertisement
Chipset Configuration:
Advanced
Chipset Configuration
AGP Aperture Size
USB Controller
USB 2.0 Support
USB Device Legacy Support
DRAM CAS Latency
Over Vcore Voltage
F1:Help
Esc:Previous Menu
AGP Aperture Size: It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the installed AGP card's specifications requires other
sizes.
USB Controller: Use this to enable or disable the use of USB controller.
USB 2.0 Support: Use this to enable or disable USB 2.0 support
USB Device Legacy Support: Use this to enable or disable the support to
emulate legacy I/O devices such as mouse, keyboard,... etc.
DRAM CAS Latency:
This is used to adjust the means of memory accessing. Configuration options:
[Auto], [2T], [2.5T], [3T].
Over Vcore Voltage: Enable this item will increase the CPU Vcore voltage
around 5%. The default value is [Disabled].
It is not recommended to enable "Over Vcore Voltage" feature.
Doing so may cause CPU damage.
AMIBIOS SETUP UTILITY - VERSION 3.31a
64M
Enabled
Enabled
Enabled
Auto
Disabled
:Select Item
+/-:Change Values
Enter:Select
[ Setup Help ]
<Enter> to select the
size of mapped memory
for graphics data.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
Advertisement
Table of Contents
