Functions - ASROCK K10N7SLI Installation Manual

1.3.2 Installing Windows

Functions

If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows ®
Insert the Windows Vista
® TM
to boot your system, and follow the instruction to install Windows
Vista 64-bit OS on your system. When you see "Where do you want to install Windows?
TM
" page, please insert the ASRock Support CD into your optical drive, and click the "Load
Driver" button on the left on the bottom to load the NVIDIA
drivers are in the following path in our Support CD:
.. \ I386 \ Vista32_RAID (For Windows
.. \ AMD64 \ Vista64_RAID (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
® TM TM
Vista / Vista
Vista / Windows Vista
® TM ® TM
Advanced screen
Vista TM / Vista TM 64-bit OS on your system.
/ Windows Vista 64-bit optical disk into the optical drive
® TM
Vista OS)
® TM
Vista 64-bit OS)
® TM
Vista / Windows
® TM ®
Vista / Windows Vista
® TM ® TM
7
64-bit With RAID
64-bit on your SATA / SATAII
IDE Configuration.
Vista / Windows
® TM
RAID drivers. NVIDIA RAID
® ®
Vista 64-bit optical disk into
TM
64-bit on IDE HDDs and want to
®