Installing Windows ® 7 / 7 64-Bit / Vista; Vista Tm 64-Bit With Raid Functions - ASROCK H77 Pro4-M Installation And Configuration Manual

2.3 Installing Windows
TM
Vista
RAID mode is not supported under Windows
If you want to install Windows
64-bit OS on your SATA / SATA2 / SATA3 HDDs with RAID
functions, please follow the procedures below.
STEP 1: Set up BIOS.
STEP 2: Use "RAID Installation Guide" to set RAID
STEP 3: Install Windows
After the installation of Windows
to manage RAID functions, you are allowed to use both "RAID Installation Guide" and
"Intel Rapid Storage Information" for RAID configuration. Please refer to the document
in the Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration",
which is located in the folder at the following path: .. \ RAID Installation Guide and
the document in the support CD, "Guide to Intel Rapid Storage", which is located in
the folder at the following path: .. \ Intel Rapid Storage Information
®
64-bit With RAID Functions
A. Enter BIOS SETUP UTILITY Advanced screen
Storage Configuration.
B. Set "SATA Mode Selection" to [RAID].
configuration.
Before you start to configure the RAID function, you
need to check the installation guide in the Support
CD for proper configuration. Please refer to the
document in the Support CD, "Guide to SATA Hard
Disks Installation and RAID Configuration", which is
located in the folder at the following path:
.. \ RAID Installation Guide
®
64-bit OS on your system.
®
7 / 7 64-bit / Vista
If you want to use "Intel Rapid Storage" in Windows
install "SATA2 driver" from the Support CD again so that "Intel Rapid
Storage" will be installed to your system as well.
7 / 7 64-bit / Vista
®
XP / XP 64-bit.
®
7 / 7 64-bit / Vista
TM
7 / 7 64-bit / Vista
TM TM
/ Vista 64-bit OS, if you want
6
TM
/
TM TM
/ Vista
TM
/ Vista
®
environment,