Pitch Bending - American Audio Encore 1000 User Manual And Reference Manual

PITCH ADJUSTMENTS

2. PITCH BENDING:

Unlike the PITCH SLIDER (5) adjustment t
during playback. There are two ways to operate this function with the (-) & (+) PITCH BEND BUTTONS (8) or
with the JOG WHEEL (9). The maximum pitch bend percentage allowed is +/- 100%. The pitch bend func-
tion will work in conjunction with the PITCH SLIDER (5) pitch setting. For example, if the PITCH SLIDER (5)
is set to a 2% pitch gain the pitch bending process will begin at 2% and wi
+
/- 100%.
PITCH BEND BUTTONS (8):
The (+) PITCH BEND BUTTON (8) will increase track playback speed and the (-) PITCH BEND BUTTON (8) will
decrease track playback speed. The extent to which the speed changes is proportionate to the amount of time
the button is pressed. For example, if the (+) PITCH BEND BUTTON (8) is held down continuously as in figure
28, the disc speed will increases and will continue to increase until it reaches a maximum of 16% speed gain.
When you release the (+) PITCH BEND BUTTON (8) the disc speed will automati
Note:
speed. 100% Pitch Adjustment works with CDs only, not Mp3 CDs
Adjusting the PITCH SLIDER'S RANGE:
SLIDER'S (5) operating range at any time. To change the operating range
be sure the pitch function is turned on, see figure 24. The pitch percent-
age can be changed between +/-4%, +/-8%, +/-16%, & 100%. 4% will
allow the least amount of pitch manipulation and 100% will allow the
most amount of pitch manipulation. To adjust the different ranges, press
the PITCH ON/OFF BUTTON (6) and tap on the PITCH RANGE BUTTON
(7) until your desired value is reached, see figure 26.
Adjustment works with CDs only, not Mp3 CDs
Figure 26
Holding down or tapping on the (+)
PITCH BEND BUTTON (8) will provide
a speed bump in the playback pitch.
Figure 28
American Audio - www.AmericanAudio.us - Encore 1000 Instruction Manual Page 24
© ®
his function will momentarily increase or decrease a tracks speed
Holding down or tapping on the (-)
PITCH BEND BUTTON (8) will provide
a slow down in the playback pitch.
You may change the PITCH
Note:
.
ll continue to the maximum of
ally return to
c
.
Figure 27
100% Pitch
it's previous set