Setting A Cue Point - American Audio Encore 1000 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)

8. SETTING A CUE POINT

A cue point is the exact point playback will begin when the PLAY/PAUSE button (11) is pressed. You may set
your cue points anywhere on a disc or in a track. There are three (3) ways to set and create a CUE point as
detailed in figures 14, 15, and 16.
2) You may also use the JOG WHEEL (9) to set a cue point. While a disc is
in PAUSE or CUE mode, use the JOG WHEEL (9) to scroll through a track
and find your desired starting point. Once you have found your desired CUE
point press the PLAY BUTTON (11) to set your cue point. Pressing the CUE
BUTTON (13) will now return you to this exact point.
NOTE: Scratch mode must be inactive for JOG WHEEL search mode to work. It is
best to use the rim of the JOG WHEEL.
1) You may press the IN BUTTON (10) on the fly (while the disc is playing). This
will set a CUE Point without music interruption. Pressing the CUE BUTTON
(13) will now return you to the same point that you pressed the IN BUTTON
(10).
Figure 14
3) You may also use the SEARCH BUTTONS (14) to set a cue point. While
a disc is in PAUSE or CUE mode, use the SEARCH BUTTONS (14) to scan
through a track to find your desired starting point. Once you have found
your desired position press the PLAY BUTTON (11) to set your cue point.
Pressing the CUE BUTTON (13) will now return you to this exact point.
Figure 16
American Audio - www.AmericanAudio.us - Encore 1000 Instruction Manual Page 20
© ®
Figure 15