Features; Set-Up Installation - American Audio VMS2 User Manual And Reference Manual

MAIN FEATUrES
• 3 Cue Points Per Side
• MIDI Control via USB
• Built-In 4 In 4 Out
• Seamless Loop (uninterrupted loop playback)
• Full EQ on 2 MIDILOG Channels
• Crossfader Assign, Curve, & Reverse
• Pitch Lock
• Pitch Bend
• 82 MIDI Controls
• USB/Analog Source Selects on Each MIDILOG Channel
MINIMUM SySTEM rEqUIrEMENTS*
PC Requirements:
• Windows XP Sp2 or Windows Vista (32-bit & 64-bit supported)
• PIV 1.2GHz Computer (SSE2 CPU), AMD 64 or Greater
• 1024_768 SVGA Video
• 2 GIG RAM (Vista)
• 40MB Free on the Hard-Drive (Recommended 2000MB)
• DirectX 9.0
Mac Requirements:
• Mac OS X 10.5 PPC/Intel, 10.5.6 Intel, or 10.6 Intel
• 1.86GHz
• 2GB RAM
* System Requirements may differ due to manufacturer software
SET-UP
1. Checking the Contents
Be sure your VMS2™ was shipped with the following:
1) VMS2™ Controller
3) USB Cable
5) Virtual DJ Software
2. Installing the Units
1) Place your unit on a flat surface or mount it in a secure rack mount case.
2) Be sure the player is mounted in a well ventilated area where it will not be exposed to direct
sunlight, high temperatures, or high humidity.
3) Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesir-
able interference.
3. Connections
1) Be sure main power is connected last to prevent any electrical damage.
2) audio connectionS: Use RCA or XLR cables to connect the VMS2™ outputs to pow-
ered speakers or an amplifier. Never connect this player's output to a mixers "phono" inputs.
CAUTION:
• To avoid severe damage to the unit, be sure the power is off when making connections to
the unit.
American Audio - www.americanaudio.us - VMS2™ Instruction Manual Page 7
© ®
• 2-Channel Mixer w/ Volume Faders
• Stereo Master and Booth Outputs
• Mic
• Master Volume Control
• Track & Deck Selectors
• Durable Touch Sensitive High-Res Jog Wheel
• One Mic Combo Jack
• Innofader Compatiable
2) Operating Instructions (This Booklet)
4) 6V Power Adapter
6) Warranty card