Connecting To A Projector (Usb) - Casio ClassPad 330 Hardware User's Manual

Connecting to a Projector (USB)

Use the procedure below to connect ClassPad to a CASIO projector.
k Required Hardware
ClassPad: 1 unit
Projector: 1
Special USB Cable: 1
k Connectable Projectors (As of October 2011)
XJ-A135, XJ-A145, XJ-A155, XJ-A235, XJ-A245
XJ-A135V, XJ-A145V, XJ-A155V, XJ-A235V, XJ-A245V, XJ-A255V
XJ-M145, XJ-M245, XJ-M155, XJ-M255
XJ-H1650
XJ-ST145, XJ-ST155
Some of the projector models listed above may require updating to the latest firmware
version to support connection with your ClassPad. Visit the site below for information about
which projector models require firmware updating, how to check the firmware version of a
projector, how to update a projector's firmware, and the latest CASIO projector models that
are available.
http://edu.casio.com/support/projector/
u
ClassPad Operation
(1) Turn off the ClassPad.
(2) Connect one end of the special cable that comes with the ClassPad to the USB port of
your projector.
(3) Connect the other end of the special cable as shown below.
• For information about what you should do to project ClassPad screen contents, see
"2-7 Projecting ClassPad Screen Contents from a Projector".
2-2-4
Connecting the ClassPad to Another Device
20120301