Buffalo WLI-UC-G450 User Manual page 22

Chapter 3 Connect to a Wireless Network
4
Use a PC with a wired Ethernet connection to log in to the access point's management utility.
Note: If the access point you are trying to connect is a Buff alo AirStation, click Wireless Confi g > WPS from the
home page of the confi guration interface. The screen to enter the PIN code will be displayed.
5
When "Connection has been Completed" is displayed in Client Manager 3, your connection is
complete.
WLI-UC-G450 User Manual
This screen will be displayed.
Navigate to the WPS PIN
confi guration screen, then enter
the PIN that you write down in
step 2.
Note: If the access point you are
trying to connect is a Buff alo
AirStation, enter the PIN in
"Enrollee PIN" fi eld and click
[OK].
21