Chapter 2: Hardware Setup; Tools And Parts For Hard Disk Installation; Install Hard Disks - Synology RS2212 Quick Installation Manual

Hardware Setup
Chapter 2:

Tools and Parts for Hard Disk Installation

 A screwdriver
 At least one 3.5" or 2.5" SATA hard disk
(Please visit www.synology.com
Warning: If you install a hard disk that contains data, system will format the hard disk and erase all data. If you still
need the data, please back it up before installation.

Install Hard Disks

1 Pull the hard drive try handle in the direction as indicated below to remove the hard drive tray.
2 Load the hard disk in the hard drive tray.
 For 3.5" Hard Disk: Place the hard disk in the hard drive tray, turn the tray upside down, and then tighten
the screws to secure the hard disk.
7
for compatible hard disk models.)
C h a p t e r
2