Led Behavior - Synology RX410 User Manual

Article Name
RESET Button
eSATA Port
Fan
Power Port

LED Behavior

LED
POWER
Flashing Orange
eSATA
Flashing Green
RAID
STATUS
Flashing Green
Hard Disk
Status
8 Chapter 1: Get Started with RX410
Location
Front & The RESET button is used to restore the settings to the
Back factory default.
The eSATA port is used to connect RX410 to RackStation
Back
servers.
The fan is built to exhaust waste heat out of RX410.
Back If the fan is not working, RX410 will "beep" every few
seconds.
The power port is where you connect the power cord to
Back
RX410.
Behavior Description
Solid Green
Power is on
Off Power is off
Solid Green
Synology RackStation is connected
Fan is not working
Off Synology RackStation is disconnected
Solid Green
Volume is created
Volume is degraded
Off
Volume is crashed or not created
Solid Green
System is functioning
Off System is not working
Solid Green
Disk is ready and idle
Disk is being accessed
Solid Orange
Read/write or other errors are encountered
Off No internal disk is found
Description