Table of Contents
Advertisement
2 Load the hard disk in the hard drive tray.
• For 3.5" Hard Disk: Place the hard disk in the hard drive tray, and then
tighten the screws to secure the hard disk.
• For 2.5" Hard Disk: Place the hard disk in the rectangular area (shown
below) of the hard drive tray, turn the tray upside down, and then tighten
the screws to secure the hard disk.
3 Insert the loaded hard drive tray into the empty hard drive bay.
Important: Make sure the tray is pushed in all the way. Otherwise, the hard disk
might not be able to function properly.
4 Push the clip to fix the hard disk tray.
12
Chapter 2: Set Up RX410
Advertisement
Table of Contents
