2.5
Expansion slot
2.5.1
Installing an expansion card to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove the
bracket if you want to install PCI Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card:
1.
Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express x16 slot on the
motherboard.
2.
Place the riser card bracket on a
flat and stable surface, then remove
the screw from the slot bay.
3.
Install a PCI Express x8 or x16
card to the bracket as shown, then
secure the card with a screw.
4.
Repeat the previous steps to Install another PCI Express x8 or x16 card if
needed.
2-12
Chapter 2: Hardware setup