Attaching The Cover; Finishing Component Removal - Fujitsu Lifebook T902 Operating Manual

Removing and installing components during servicing

Attaching the cover

2
2
1
► Place the cover in the correct mounting position (1).
► Tighten the screws (2).

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "Inserting battery", Page 48).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
102 Fujitsu Technology Solutions