Dividing A Scene (Avchd) - Panasonic HC-V100M Operating Instructions Manual

Dividing a scene (AVCHD)

It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted
after dividing.
≥ Change the mode to
[AVCHD]. (l 29)
1
Select the menu.
: [EDIT SCENE] # [DIVIDE] # [SET]
2
Select the scene you wish to divide using the cursor button and
press the ENTER button.
3
Select to set the dividing point.
≥ It is convenient to use Slow-motion Playback and
Frame-by-frame Playback. (l 56)
≥ Select [YES] to continue dividing the same scene.
To continue dividing other scenes, select [NO] and
repeat Steps 2-3.
4
Press the MENU button to complete dividing.
≥ Unwanted parts can be deleted. (l 62)
To delete all the divided points
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if the number of scenes of a given date would exceed 99
scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.
64
VQT3Y11
, and set [VIDEO/PICTURE] of the play mode selection to
0h00m15s 0h00m15s 0h00m15s