Radio Operation - Clarion NX602 Owner's Manual

10. RADIO OPERATION

Select tuner for listening to the radio
ALL ] button to enter main
Long press [
source menu, then select [Tuner] to enter
Tuner mode.
If Tuner is not on the current source menu,
touch [ - ] buttons on the bottom of the
screen, or hold the center of screen and drag
left/right to show more icons.
Menu of listening to the radio
Touch the bottom half of screen to show
operation bar.
1. Band switch
2. Information area
3. Preset station number
4. Current station frequency
5. Show preset stations list
6. Scan preset stations
7. Manual tune backward
Auto tune backward. (long press)
8. Frequency bar
9. Manual tune forward
Auto tune forward. (long press)
10. Show other options
11. Choose local or distant seeking mode
12. Store stations automatically
13. Back to main operation bar
Select one radio band
Touch the top left corner of the screen to
select one radio band among FM1, FM2, FM3
and AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Touch the [ ] or [
operation bar to tune in a higher / lower
station.
Auto tuning
Hold the [ ] or [
operation bar for more than 2 seconds to seek
a higher / lower station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
1. Touch the [ ] button on the operation
bar.
2. When a desired station is tuned in, press
the [ ] button to continue receiving that
station.
Auto store
Only stations with sufficient signal strength will
be detected and stored in the memory.
To start automatic station search, touch
following buttons on the operation bar in
sequence: [ ] -> [
To stop auto store, press other buttons having
radio functions.
Notes:
1. A fter auto store, the previous stored
stations will be overwritten.
2. T he unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store by AS
function. Each bands can store 6 stations,
NX602 can store 24 stations in total.
] button on the
] button on the
] -> [OK] .
NX602
29