JVC KW-NT300 Instruction Manual page 99
Jvc - 6.1" - built-in gps - cd/dvd - bluetooth-ready - in-dash deck
Hide thumbs
Also See for KW-NT300:
- Installation manual (8 pages) ,
- Instructions for use manual (138 pages) ,
- Instructions manual (119 pages)
Table of Contents
Advertisement
Available languages
Available languages
A
1
When the unit recognizes the Bluetooth
device you want to connect, the following
screen appears.
Enter the PIN code of the unit shown on the
screen to the Bluetooth device.
The default setting is "0000".
Some Bluetooth mobile phones do not display this
screen.
In this case, check the PIN code of the unit, and
then enter it to the Bluetooth device.
To check the PIN code, see page 100.
When registration is completed, the BT icon
appears on the screen of the unit.
B
1
When the unit recognizes the Bluetooth
device you want to connect, the following
screen appears.
Press [Pair].
When registration is completed, the BT icon
appears on the screen of the unit.
99
Using Bluetooth device
Hide quick links:
Advertisement
Chapters
Table of Contents
