Solutions To Sound Problems; Solutions To Microphone Problems - Epson PowerLite 915W User Manual

Related concepts
Projector Lamp Maintenance
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Feature Settings - Settings Menu

Solutions to Sound Problems

If there is no sound when you expect it or the volume is too low or high, try the following solutions:
• Adjust the projector's volume settings.
• Press the A/V Mute button on the remote control to resume video and audio if they were temporarily
stopped.
• Press the Source Search button to switch to the correct input source, if necessary.
• Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
• Check the audio cable connections between the projector and your video source.
• Make sure any connected audio cables are labeled "No Resistance".
• If you are using the USB Display function, turn on the Output audio from the projector setting in the
Epson USB Display Settings program on your computer.
• If Standby Audio is enabled (PowerLite 935W), the projector's fans may be louder than usual when
the product wakes up from standby mode. The projector's fans should resume normal noise levels
within 2 minutes.
Parent topic:

Solutions to Microphone Problems

If there is no sound when you use a microphone connected to the projector (not available for PowerLite
92/93), try the following solutions:
• Make sure the microphone is securely connected to the projector.
• Adjust the Mic Input Level and Plug-in Power settings as necessary in the projector's menus.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Solving Image or Sound Problems
Solving Image or Sound Problems
153