ViewSonic Pro8500 User Manual page 35

Sharpness: Sharpen or soften the image.
Tint: Shift colors toward red or green.
Audio Setting
Allow you to enter the Audio Setting menu.
Computer 1: Select the audio input for Computer in 1 signal.
When Audio in 1 is turned on, Audio in 2 and Audio in 3 will turn off
automatically.
Computer 2: Select the audio input for Computer in 2 signal.
When Audio in 2 is turned on, Audio in 1 and Audio in 3 will turn off
automatically.
Video Source: Select the audio input for video source.
When Audio in 3 is turned on, Audio in 1 and Audio in 2 will turn off
automatically.
HDMI: Select the audio input for HDMI signal.
When HDMI is turned on, Audio in 1, Audio in 2 and Audio in 3 will turn off
automatically.
Microphone Volume
Adjust the microphone's volume level.
Speaker Volume
Adjust the projector's volume level.
Mute
Cut off the sound temporarily.
Setting
Menu Position
Choose the menu location on the display screen.
Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in front of
or behind the screen. Invert or reverse the image accordingly.
Signal Type
Specify the source to the Computer in 1/Computer in 2 terminal that you wish to project.
Auto : Automatically detect the input signal type from Computer in 1 and Computer
in 2 terminals.
RGB : For VGA signal
YCbCr/YPbPr:For component signal
Power Saving
If the input source is not detected and no operation is performed for a specific period of time,
projector will automatically turn off.
ViewSonic Pro8500 33