ViewSonic Pro8500 User Manual page 32

NetWork
Information
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Brightness, Contrast, Saturation, Color Setting >
Color Temperature, Gamma, Overscan, Noise Reduction, Audio Setting, Microphone
Volume, Speaker Volume, Mute, Keystone, Aspect Ratio, Projection, Power Saving,
ECO Mode, Filter Mode, OSD Position, OSD Transparency, Closed Caption,
Message, Zoom, DCR and Test Pattern.
ViewSonic Pro8500
Wired LAN
Wireless LAN
Network Restart
Input Source
MAC Address
Filter Hours*2
Filter Hours Reset*2
Lamp Hours
Lamp Hours Reset
Factory Default
Status
Default Gateway
DNS
Apply
Status
SSID
SSID Display
Connection Mode
Apply
Yes, No
Computer 1, Computer 2,
Component, Composite,
S-Video, HDMI, USB 1, USB 2
Disconnect, Connect
On, Off
Disconnect, Connect
On, Off
AP, Infrastructure
On, Off
30