Shutting The Projector Down; Resetting All Settings; Phenomena That May Be Easy To Be Mistaken For Machine Defects - Hitachi CP-D10 Operating Manual

Shutting the projector down

15

Resetting all settings

Phenomena that may be easy to be mistaken for machine defects

Phenomenon
48
Cases not involving a machine defect
The electrical power cord is not plugged in.
The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Either there is no lamp and/or lamp cover, or either
The signal cables are not correctly connected.
Signal source does not correctly work.
The input changeover settings are mismatched.
The BLANK function for pictures and the MUTE
function for sounds are working.
Troubleshooting
Reference
page
12
10
–
46
63