Contents Of Package; Loading Batteries Into The Remote Control - Hitachi CP-D10 Operating Manual

Contents of package

Your projector should come with the items
shown below. Check that all the items are
included. Require of your dealer immediately if
any items are missing.
(1) Remote control with the two AA batteries
(2) Power cord
(3) Computer cable
(4) Lens cover and Strap
(6) Security label
NOTE
to use the original packing materials when moving the projector. Use special
caution for the lens.

Loading batteries into the remote control

Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1. Holding the hook part of the battery
cover, remove it.
Align and insert the two AA batteries
2.
(
HITACHI MAXELL, Part No.LR6 or R6P
according to their plus and minus terminals
as indicated in the remote control.
Replace the battery cover in the direction of the arrow and snap it back into
3.
place.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage,
types at the same time. Do not mix a new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
Always handle the batteries with care and use them only as
(1)
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
(2)
(3)
1
)
5
(4)
(5)
(6)
2
3