Hitachi CP-A222WN User Manual page 54

Item
PICT. POSIT. H
(CP-AW252WN)
KEYSTONE
KEYSTONE
(continued on next page)
Using the ▲/▼ cursor buttons selects the horizontal picture
position.
LEFT MID
The PICT. POSIT. H is not changed if any of the following cases
apply.
• The ASPECT is set to 16:9 or 16:10.
• The input signal has an aspect ratio of 16:9, 16:10 or verticallly
smaller than 16:10, while ASPECT is set to NORMAL.
• Horizontal size of the displayed image is full on the effective
display area, while the ASPECT is set to NATIVE.
• One of the following messages is displayed on the screen:
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
• The BLANK or TEMPLATE function is selected.
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• This function will be unavailable when the TRANSITION
DETECTOR is on (
Using the ◄/► buttons corrects the horizontal keystone distortion.
Shrink the right of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• This function will be unavailable when the TRANSITION
DETECTOR is on (
Description
RIGHT
Shrink the top of the image
84) or the PERFECT FIT (
Shrink the left of the image
84) or the PERFECT FIT (
SETUP menu
46) is adjusted.
46) is adjusted.
45