Hitachi CP-A222WN User Manual page 182

3. Web Control
3.2 Crestron e-Control
3 Projector (continued)
Configures the network settings of the projector.
Item
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
To apply the settings, click the [Send] button.
4 User Password
Configures the User Password. To prompt the entry of User Password before
starting e-Control
Item
New Password
Confirm
To apply the settings, click the [Send] button.
5 Admin Password
Configures the Admin Password. To prompt the entry of Admin Password before
displaying the Tools window, select the checkbox.
Item
New Password
Confirm
To apply the settings, click the [Send] button.
46
®
- Tools window (continued)
Enables DHCP.
Configures the IP address when DHCP is disabled.
Configures the subnet mask when DHCP is disabled.
Configures the default gateway when DHCP is disabled.
Configures the DNS server address.
®
, select the checkbox.
Configures the password.
You can specify a password up to 26 alphanumeric characters.
The usable symbols are space and the following:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Reenter the above password for verification. If the password is
incorrect, an error message is displayed.
Configures the password.
You can specify a password up to 26 alphanumeric characters.
The usable symbols are space and the following:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Reenter the above password for verification. If the password is
incorrect, an error message is displayed.
Description
Description
Description