Dell M110 User Manual page 34

W I
HITE NTENSITY
intensity.
NOTE:
1
If you adjust the settings for Brightness, Contrast, Color Temperature,
Saturation, Sharpness, Tint, and White Intensity the projector automatically
switches to Custom mode.
2
Saturation, Sharpness, and Tint are only available when input source is from
A/V in.
D S
ISPLAY ETTINGS
The display settings menu provides the following options:
H
ORIZONTAL
move the image left.
V P
ERTICAL
the image down.
F
REQUENCY
match the frequency of your computer's graphics card. If you see a
vertical flickering wave, use the Frequency control to minimize the
bars. This is a coarse adjustment.
T —Synchronize the phase of the display signal with the
RACKING
graphic card. If you experience an unstable or flickering image, use
the Tracking to correct it. This is a fine adjustment.
A R
SPECT ATIO
image appears. Options are: Origin, 16:9, and 4:3.
• Original — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
• 16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
34 Using Your Projector
—Press
and use
(I PC M )—
N ODE
P —Press
OSITION
—Press
OSITION
—Allows you to change the display data clock frequency to
—Allows you to select the aspect ratio to adjust how the
and
Select and press
to move the image right and
to move the image up and
to display white
to activate display settings.
to
to move