Using The On-Screen Display; Input Source - Dell M110 User Manual

Using the On-Screen Display

• The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
• Press the Menu button on the control panel or the remote control to enter the
Main Menu.
• To select an option, press the
or remote control.
• Use the or
settings.
• To exit the OSD, press the Menu button directly on the control panel or the
remote control.

INPUT SOURCE

The Input Source menu allows you to select your projector's input source.
NOTE:
When you connect the projector and computer via the USB cable, a
USB Connected message will pop up and allow you to select input sources as
DoUSB or Storage.
or
buttons on the control panel or remote control to adjust the
buttons on your projector's control panel
A S —
If you select and press
UTO OURCE
to activate, the Auto Source option
will automatically find the next available
input source.
VGA—
Press to detect a VGA signal.
D USB—
Allows you to display the
O
computer/laptop screen to your
projector via the USB cable.
Using Your Projector 29