Table of Contents
Advertisement
9.
USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P5G41T-M/USB3
P5G41T-M/USB3 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
10.
Serial port connector (10-1 pin COM1)
The connector is for a serial (COM) port. Connect the serial port module cable to the
connector, then install the module to a slot opening at the back of the system chassis.
The serial port module is purchased separately.
P5G41T-M/USB3
P5G41T-M/USB3 Serial port (COM1) connector
1-26
USB56
USB78
PIN 1
PIN 1
COM1
PIN 1
Chapter 1: Product introduction
Advertisement
Table of Contents
