Table of Contents
Advertisement
64
Hardware Maintenance Manual
POST Error Code
168
Alert on LAN error
17X 18X
175 Primary Copy of Secure Data is
damaged
176 The System has been tampered with
177
Corrupted Administrator Password
178
179 Boot Integrity Services Segment Error
183
184
Asset Control Antenna not detected
185
Corrupted boot sequence
186 Security Hardware Control Logic Error
187
189
190
System Security: Invalid Remote Change
Requested
191 System Security: IBM Embedded
Security Hardware Reset
193 System Security: IBM Embedded
Security Hardware Removed
194 System Security: Asset ID Antenna has
been Removed
195 System Security: Asset ID Antenna has
been Installed
196 System Tampered Cleared
1XX
Not listed above
201 20X
Memory data error
FRU/Action
1. Run Setup. Check to see that Ethernet
and Alert on LAN are enabled.
2. System Board
1. C2 Security
1. Run Configuration. See "IBM Setup
Utility program" on page 9.
2. System Board
1. Covers were removed from the
computer
1. System Board
1. System Board
1. System Board
1. Enter the administrator password
1. Make sure Asset Care and Asset ID are
enabled in Configuration/Setup
2. RFID Antenna
3. System Board
1. Set configuration and reinstall the boot
sequence
1. System Board
1. Clear Administration password
2. System Board
1. More than three password attempts
were made to access the computer
1. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. Run Enhanced Diagnostics Memory
Test
2. Memory Module
3. System Board
Advertisement
Table of Contents
