Multiboot; About The Boot Device Order; Enabling Boot Devices In Computer Setup - HP ProBook 4525s - Notebook PC Reference Manual

Hp notebook reference guide - windows 7
Hide thumbs Also See for ProBook 4525s - Notebook PC:
Table of Contents

Advertisement

9

MultiBoot

About the boot device order

As the computer starts, the system attempts to boot from enabled boot devices. The MultiBoot utility,
which is enabled at the factory, controls the order in which the system selects a boot device. Boot devices
can include optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices.
Boot devices contain bootable media or files that the computer needs to start and operate properly.
NOTE:
Some boot devices must be enabled in Computer Setup before they can be included in the
boot order.
The factory setting is for the computer to select the boot device by searching enabled boot devices and
drive bay locations in the following order:
NOTE:
Some of the boot devices and drive bay locations listed may not be supported on your
computer.
Notebook upgrade bay
Optical drive
Notebook hard drive
USB diskette drive
USB CD-ROM
USB hard drive
Notebook Ethernet
Secure Digital (SD) Memory Card
Docking station upgrade bay
External SATA drive
You can change the order in which the computer searches for a boot device by changing the boot order
in Computer Setup. You can also press
is displayed at the bottom of the screen, and then press f9. Pressing
current boot devices and allows you to select a boot device. Or, you can use MultiBoot Express to set
the computer to prompt you for a boot location each time the computer turns on or restarts.

Enabling boot devices in Computer Setup

The computer will boot to a USB device or a NIC device only if the device has first been enabled in
Computer Setup.
To start Computer Setup and enable a USB device or a NIC device as a boot device, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
f10
to enter Computer Setup.
esc
while the "Press the ESC key for Startup Menu" message
esc
while the "Press the ESC key for Startup Menu"
f9
displays a menu that shows the
About the boot device order
69

Advertisement

Table of Contents
loading

Table of Contents