ViewSonic PJD8333s User Manual page 47

About AP and Client modes
In AP mode, you need to use your computer's wireless connection utility to search for the
projector's SSID and connect to it. Then you can search for the projector with vsPresenter.
In Client mode, you should connect both your computer and projector to the same AP
router and make connections with the IP address.
The following diagram describes how to access the Internet in AP and Client modes.
(AP Mode)
Important
•
If you need more information about AP and Client modes, please refer to user
documentations for Wireless Routers which are usually available on 3C stores.
(Client Mode)
Internet
40
Internet