Storage Confi Guration - ASROCK Fatal1ty Z68 Professional Gen3 Series User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Enabled]. Please set this option to [Enabled] if you plan to use this moth-
erboard to submit Windows® VistaTM certifi cation.
Good Night LED
This allows you to enable to turn off Power LED, Lan LED at power on.
Onboard Debug Port LED
This allows you to enable or disable the onboard Debug Port LED.
3.4.4 Storage Configuration
SATA3 Mode
This item is for SATA3_A1 to SATA3_A4 ports. Use this to select SATA3
mode. Configuration options: [IDE Mode], [AHCI Mode] and [Disabled].
The default value is [IDE Mode].
We recommend to use Intel
SATA3_1, and SATA2_2 to SATA2_5 ports) for your
bootable devices. This will minimum your boot time and
get the best performance. But if you still want to boot from
Marvell SATA3 controller, you can still enable this in UEFI.
SATA Mode
This item is for SATA3_0, SATA3_1, and SATA2_2 to SATA2_5 ports. Use
this to select SATA mode. Confi guration options: [Disabled], [IDE Mode],
[AHCI Mode] and [RAID Mode]. The default value is [IDE Mode].
AHCI (Advanced Host Controller Interface) supports NCQ
and other new features that will improve SATA disk perfor-
mance but IDE mode does not have these advantages.
®
Z68 SATA ports (SATA3_0,
76