ASROCK Fatal1ty Z68 Professional Gen3 Series User Manual page 44

IEEE 1394 Header
(9-pin FRONT_1394)
(see p.15 No. 24)
Serial port Header
(9-pin COM1)
(see p.15 No. 29)
HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(see p.15 No. 32)
The Installation Guide of Front USB 3.0 Panel
Step 1 Prepare the bundled Front USB 3.0
Panel, four HDD screws, and six
chassis screws.
Step 3 Intall the Front USB 3.0 Panel into
the 2.5" drive bay of the chassis.
Besides one default IEEE 1394
port on the I/O panel, there
is one IEEE 1394 header
(FRONT_1394) on this
motherboard. This IEEE 1394
header can support one IEEE
1394 port.
This COM1 header supports a
serial port module.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Step 2 Screw the 2.5" HDD/SSD to the Front
USB 3.0 Panel with four HDD
screws.
Step 4 Screw the Front USB 3.0 Panel to
the drive bay with six chassis screws.
44