HP Xw460c - ProLiant - Blade Workstation Installation Instructions page 2

ships with your enclosure for more information on the
association between the mezzanine bay and the interconnect
bays. Where you install the mezzanine card will determine
where you need to install the interconnect modules.
See the HP BladeSystem Onboard Administrator User Guide
for specific Pass-Thru port connections for each blade.
Connections differ by blade type. The information in this
guide is needed to understand cabling between the Pass-Thru
module and the network switches.
The Onboard Administrator screen example is a helpful
reference for port mapping.
Pass-Thru connection and LED
identification
NOTE: See the HP BladeSystem enclosure setup and
installation guide for more information on the
BladeSystem port mapping.
Item Description
1 HP 1Gb Ethernet Pass-Thru Module for HP c-
Class BladeSystem
2 HP 16 Port 4Gb FC Pass-Thru Module for HP c-
Class BladeSystem
Pass-Thru LED definitions
UID (1) blue Interpretation
On Activated
Off Deactivated
Internal health LED color (2)
Off
Green
Amber
Fibre channel link/Port ID (3)
On
Flashing
Ethernet activity (4) green
Flashing
Off
Ethernet link/Port ID (5) amber
Flashing
On
Off
Interpretation
Normal (power off)
Normal (power on)
Problem (a fault exists)
Interpretation
Link
Port ID
Interpretation
1000 activity
No activity
Interpretation
1000 link/Port ID
1000 link
No link