Table of Contents
Advertisement
TOSHIBA Password Utility
The TOSHIBA Supervisor Password Utility allows you to maintain an
additional level of security and provides two levels of password security:
User and Supervisor.
Passwords set in TOSHIBA Supervisor Password Utility are different from
the Windows
User Password
To start the utility, point to or click the following items:
Launch TOSHIBA Assist
■
Registered
Click to register a password of up to 8 characters. After a password is
set, you will be prompted to enter it when you start the computer.
■
Not Registered
Click to delete a registered password. Before you can delete a
password, you must first enter the current password correctly.
■
Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK, then, each time the computer is switched
on, this text will be displayed along with the prompt for the password.
Supervisor password
If you set a supervisor password, some functions will be restricted when a
user logs on with the user password. To set a supervisor password:
TOSHIBA Assist
This utility lets you do the following:
■
Register or delete the supervisor password.
■
Specify restrictions for general users.
Starting the computer by password
If you have already registered a password, there is one way to start the
computer:
■
Enter the password manually.
The password is necessary if the computer was shut down in boot mode
and Hibernation mode, not in Sleep mode.
To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3, Getting Started. The
following message will appear in the LCD:
Enter Password [xxxxxxxx]
2. Enter the Password.
3. Press Enter.
User's Manual
®
login password.
SECURE
Power and Power-up Modes
SECURE
User Password
Supervisor password
6-12
Advertisement
Table of Contents
