Table of Contents
Advertisement
Pointing device
If you are using a USB mouse, also refer to the
and to your mouse documentation.
Touch Pad
Problem
On-screen pointer
does not respond to
Pad operation
Double-tapping does
not work
The mouse pointer
moves too fast or too
slow
When the reaction of
touch pad is sensitive to
slow
USB mouse
Problem
On-screen pointer
does not respond to
mouse operation
Double-clicking does
not work
User's Manual
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Try changing the double-click speed setting in
the mouse control utility.
1. Open the Control Panel and Printers and
Other Hardware, select the Mouse icon and
press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel and Printers and
Other Hardware, select the Mouse icon and
press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
Adjust the touch Sensitivity.
1. Open the Control Panel and Printers and
Other Hardware, select the Mouse icon and
press Enter.
2. Within the Mouse Properties window, click
the Device setting tab or Advanced tab.
3. Adjust the touch sensitivity under these tabs.
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click sped setting in the
mouse control utility
Troubleshooting
USB
section in this chapter
9-7
Advertisement
Table of Contents
