12.
Disconnect the webcam module cable (1) from the webcam module, and remove the webcam
module (2). The webcam module is available using spare part number 626656-001.
Reverse this procedure to install the webcam module.
13.
To replace the display inverter, disconnect the cables (1) on both sides of the inverter.
14.
Then use a flat flexible tool (2) to pry the inverter loose from the adhesive that attaches it to the
display enclosure. The display inverter is available using spare part number 616467-001.
15.
To replace the display hinge covers, remove the Phillips 2.5×4.0 screw (1) that secures each
hinge to the display enclosure.
62
Chapter 4 Removal and replacement procedures