Component Replacement Procedures; Display Assembly - HP Presario CQ45-100 - Notebook PC Manual

Component replacement procedures

Display assembly

Description
14.1-inch, WXGA, BrightView display assembly for use only in computer models with a camera
module (includes microphones)
14.1-inch, WXGA, BrightView display assembly for use only in computer models without a camera
module (includes microphones)
Remove the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Turn the computer upside down on a flat surface.
5. Slide the battery release latch (1) to release the battery.
6. Pivot the battery (2) upward and lift it out of the computer (3).
7. Position the computer with the right side toward you.
8. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
9. Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive media tray is
partially ejected from the optical drive.)
ENWW
Spare part number
486728-001
486729-001
Component replacement procedures 5