HP Presario CQ45-100 - Notebook PC Manual page 11

17. Remove the WLAN module (3) by pulling it away from the slot at an angle.
CAUTION:
module authorized for use in the computer by the governmental agency that regulates wireless
devices in your country or region. If you replace the module and then receive a warning message,
remove the module to restore computer functionality, and then contact technical support through
Help and Support.
NOTE:
module slot.
18. Remove the two Phillips PM2.5×6.0 screws (1) that secure the RTC battery compartment cover to
the computer.
19. Lift the right side of the cover (2), swing it to left, and remove the cover (3). The RTC battery
compartment cover is included in the Plastics Kit, spare part number 486862-001.
20. Disconnect the RTC battery cable (1) from the system board.
ENWW
To prevent an unresponsive system, replace the wireless module only with a wireless
WLAN modules are designed with a notch (4) to prevent incorrect insertion into the WLAN
Component replacement procedures 7