Appendix A: Backup And Recovery; Creating Recovery Discs - HP Presario CQ42-300 - Notebook PC Manual

Appendix A: Backup and recovery

Tools provided by the operating system and HP Recovery Manager software are designed to
help you with the following tasks for safeguarding your information and restoring it in case
of a system failure:
Creating a set of recovery discs
Backing up your information
Creating system restore points
Recovering a program or driver
Performing a full system recovery

Creating recovery discs

HP recommends that you create recovery discs to be sure that you can restore your
system to its original factory state if you experience serious system failure or instability.
Create these discs after setting up the computer for the first time.
Handle these discs carefully and keep them in a safe place.
Note the following guidelines before creating recovery discs:
You will need high-quality DVD+R, DVD-R, or CD-R discs. All these discs are
purchased separately. DVDs have a much higher storage capacity than CDs. If you use
CDs, up to 20 discs may be required, whereas only a few DVDs are required.
The computer must be connected to AC power during this process.
Only one set of recovery discs can be created per computer.
Number each disc before inserting it into the computer optical drive.
If necessary, you can exit the program before you have finished creating the recovery
discs. The next time you open Recovery Manager, you are prompted to continue the disc
creation process.
To create a set of recovery discs:
1. Click Start, click All Programs, click Recovery Manager, and then click Recovery
Disc Creation.
2. Follow the on-screen instructions.
Notebook Essentials
Read-write discs (such as CD-RW and DVD±RW) and double-layer DVD±R
discs are not compatible with the Recovery Manager software.
21