HP Tc2120 - Server - 256 MB RAM Installation Manual page 7

Chapter 8
If (!) or (?) symbols are reported then double click on each of the devices
with (!) or (?). Use the "Device Status" message for troubleshooting. Or if a
printer is available, use the View, Print from the menu to get a report.
3. Verify if the installed drivers are digitally signed.
a. In the Device Manager, select the device (e.g. HP AHA-29160) that
you want to verify.
b. Right click Properties | Driver.
c. Locate the "Digital Signer:" If the driver of that device is not digitally
signed, it will be indicated by the signer. If the driver of the device is not
digitally signed we recommend that you check the HP Website
www.hp.com
4. Exit the Device manager, System Properties and Control Panel applications.
5. Check the Event viewer to make sure that there are no errors in the log.
Click on Start | All Programs | Administrative tools | Event viewer.
NOTE Windows Server 2003 Event Viewer may have recorded
network errors because your network is not configured yet.
Please disregard these errors.
6. Exit event viewer.
PHASE 2 - Initialize Hard Disk Drive
NOTE
There are two types of hard drive configurations: Dynamic and
Basic. You can select the appropriate type by right clicking on
the disk drive icon. Dynamic drives are used to create volumes,
which can contain more than one physical hard drive. Basic
drives are used to create primary or local partitioned drives.
To manage your different drives and partitions:
1. Click Start | All Programs | Administrative Tools | Computer
Management | Disk Management.
2. The "Write signature and Upgrade" wizard will start if you have new hard
drives with no signatures on them. Follow the on-screen instructions to create
this signature.
3. Click OK to proceed when notified you have a new hard disk to configure.
Installing Microsoft Windows Server 2003
to install the latest driver package for that device.
7