Enhanced Write Filter Status Tool - HP t5710 - Thin Client Quick Reference Manual

Control Panel extended selections

Enhanced Write Filter status tool

✎
4-6
Overlay configuration
This button displays the Overlay information and is a combination of
the information supplied when executing
-Description ewfmgr.exe c: -Gauge
and
Clear boot command
This button is the same as executing
the DOS prompt.
Commit data to volume
This button is the same as executing
the DOS prompt.
The HP XPe Images include an EWF status service, which creates an
icon in the System Tray that shows the status of the EWF. In addition,
you can right-click on the icon to display and execute the available
options.
The EWF Status icon appears as a:
■
red lock when disabled.
■
green lock when enabled.
■
yellow lock when the state is set to change on next boot.
In the event of a corrupted EWF state, you must re-flash the thin
client with the standard shipping image provided on the Web. For
additional information, see the "HP Compaq Thin Client Imaging
Tool" white paper located at:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c0
0485307/c00485307.pdf
If you are logged on as Administrator, you can change the status of
EWF by right-clicking the icon and selecting the desired EWF state.
www.hp.com
ewfmgr.exe c:
from the DOS prompt.
ewfmgr.exe c: -NoCmd
ewfmgr.exe c: -Commit
Quick Reference Guide
from
from