[Altiris]; [Xpeprep] - HP t5630 - Thin Client Using Manual

[Altiris]

Setting
NotUseMCast = 0/1
TcpAddr = String in the
form of an IPv4 address
TcpPort = String in the form of port

[XpePrep]

Setting
Shutdown
=
Shutdown/Reboot/ Prompt/None
SettingsVersion
CommitEWF = Yes/No
Description
This setting allows you to turn off the Altiris agent
MultiCast setting. Only specify this setting if you want to
disable MultiCast. If not specified default is set to 0;
MultiCast enabled.
This setting specifies the IP address of the Altiris server.
This setting specifies the IP port of the Altiris server.
Description
This setting specifies the shutdown action to take when
complete.
Default is Prompt.
Assign a positive integer that specifies the version number
= INT
of the settings that will be maintained and compared to
prevent overwriting changes. For example, if you apply
SettingsVersion equal to 2, the next time you apply
changes you will need to update the SettingsVersion
parameter to a value greater than 2. Specify 0 or leave
this key out to apply settings regardless of the previous
version. For information on using this setting, please see
the Best Practices section of this document.
This setting conditionally commits the EWF Overlay to the
protected volume. This allows settings to be persistent
across reboots. For information on using this setting,
please see the Best Practices section of this document.
13