Peering Devices; Figure 5-1: Adding Devices To A Group - Teradici t310 User Manual

Note: After a device is successfully added to a group, the group name appears in the Group
column for each device. In Figure 5-1, the first zero client device is part of the Default group
and the third zero client device is not part of a group.
5.4

Peering Devices

You can peer (or link together) each pair of host and zero client devices. After a host and zero
client are peered, a PCoIP session can be started from the zero client. To start a PCoIP
session, the end user must click the Connect button on the zero client OSD.
To peer (link) pairs of host and zero client devices:
1. Open the MC Device Management webpage.
2. Select the host and zero client devices to be peered. In Figure 5-2 the devices
192.168.51.38 and 192.168.50.32 are selected.
3. Click the Link Devices button to peer the devices. The zero client connects to the host
192.168.51.38 when the end user clicks Connect on the zero client OSD.
TER0812002 Issue 9

Figure 5-1: Adding Devices to a Group

PCoIP Management Console User Manual
86