Autoconfig; Figure 1-8: Management Console Manual Device Discovery Feature - Teradici t310 User Manual

•
When the IP address of a device is known and the device has not been discovered
enter the address in the from IP field, and then select Discover Devices.
•
When a device is on a specific subnet but its IP address is not known, you can
command the MC to discover the devices in a range of IP addresses using both the
from IP and (optional) to IP fields. After you specify the address range, select
Discover Devices.
Note that this process can take a few minutes to complete depending on the number of
addresses searched. A status bar appears while the tool discovers devices.
•
When the FQDN of a device is known and the device is not discovered, enter the
FQDN in the FQDN field and select Discover Devices.
1.3.4

AutoConfig

When the MC discovers new PCoIP zero clients, it automatically adds them to a group and
applies the group's profile. You can create AutoConfig rules to let one group have one or
more criteria defined.
The MC supports the following criteria to decide how zero clients are automatically assigned
to groups using AutoConfig:
•
Each group can have an optional AutoConfig rule associated with it.
•
Rules are sets of optional password settings and optional IP address ranges:
o No Password: Add discovered zero clients to this group if they have no
TER0812002 Issue 9

Figure 1-8: Management Console Manual Device Discovery Feature

password configured.
PCoIP Management Console User Manual
26